Rather than being incorporated into the contact point, these balls are brazed onto the ends. They're suitable for tracing contours or reaching into grooves, slots, recesses and holes.
Different ball diameters are available for this style dial indicator contact point. These genuine MTC points can be used with any brand of dial indicator as long as you select the correct thread size.
Order No. | Ball | Length (L) | Thread | US$ |
---|---|---|---|---|
MTC10-235 | Ø .031" carbide | 1/2" | 4-48 | 19.50 |
MTC10-234 | Ø .031" ruby | 1/2" | 4-48 | 39.50 |
MTC10-236 | Ø .062" carbide | 1/2" | 4-48 | 19.50 |
MTC10-238 | Ø .120" carbide | 1/2" | 4-48 | 19.50 |
MTC10-257R | Ø 2.5 mm ruby | 1" | 4-48 | 39.50 |
MTC10-239 | Ø 0.8 mm carbide | 1/2" | M2.5 | 19.50 |
MTC10-240 | Ø 1 mm carbide | 1/2" | M2.5 | 19.50 |
MTC10-248 | Ø 1 mm carbide | 25 mm | M2.5 | 21.50 |
MTC10-301 | Ø 1.5 mm carbide | 1/2" | M2.5 | 19.50 |
MTC10-241 | Ø 2 mm carbide | 1/2" | M2.5 | 19.50 |
MTC10-241R | Ø 2 mm ruby | 1/2" | M2.5 | 39.50 |
MTC10-300 | Ø 2.5 mm carbide | 1/2" | M2.5 | 39.50 |
MTC10-242 | Ø 3 mm carbide | 1/2" | M2.5 | 24.50 |
MTC10-258 | Ø 3 mm carbide | 25 mm | M2.5 | 24.50 |
MTC10-350 | Ø 3.5 mm carbide | 1/2" | M2.5 | 24.50 |
STARRETT
An American Manufacturing Tradition