Contact Point Extensions
Extensions will not alter the indicator's range. A 1" travel indicator remains a 1" travel indicator regardless of the extension. The extensions will allow you to reach further into a hole or groove, etc. Take the thread diameter into consideration when ordering these parts. To install: unscrew the contact point from your indicator, screw the extension into the indicator and then replace the point. You can combine extensions to your heart's content. Just make sure everything is snug and tight so that you'll get consistent readings.
- Outside diameter = 5 mm (.188")
| Order No. | Extension Length (L) | Thread type | US$ |
|---|---|---|---|
| MTC09-14 | 1/4" | Inch 4-48 | 9.50 |
| MTC09-16 | 1/2" | Inch 4-48 | 9.50 |
| MTC09-18 | 3/4" | Inch 4-48 | 9.50 |
| EXT-1A | 1" | Inch 4-48 | 9.50 |
| EXT-2A | 2" | Inch 4-48 | 9.50 |
| EXT-3A | 3" | Inch 4-48 | 9.50 |
| EXT-4A | 4" | Inch 4-48 | 19.50 |
| MTC09-41 | 5" | Inch 4-48 | 19.50 |
| EXT-MF10 | 10 mm | Metric M2.5 | 9.50 |
| EXT-MF15 | 15 mm | Metric M2.5 | 9.50 |
| EXT-MF20 | 20 mm | Metric M2.5 | 9.50 |
| EXT-MF30 | 30 mm | Metric M2.5 | 9.50 |
| EXT-MF40 | 40 mm | Metric M2.5 | 9.50 |
| EXT-MF50 | 50 mm | Metric M2.5 | 9.50 |
| EXT-MF60 | 60 mm | Metric M2.5 | 9.50 |
| EXT-MF80 | 80 mm | Metric M2.5 | 19.50 |
| EXT-MF100 | 100 mm | Metric M2.5 | 19.50 |
More about dial and digital indicator contact points
- other shapes and sizes
- length extensions
- inch/metric point converter
- are you looking for test indicator contact points?
- contact point set: a full assortment of quality dial indicator points
NUTS & BOLTS
Easy reading for anyone curious about the origins of mechanical engineering.
HOW WAS THAT BUILT?
From the Brooklyn Bridge to the Sapporo Dome in Japan.
"Perfect for browsing by young readers with an interest in engineering or architecture." - Wall Street Journal
- the Indicator Reference Guide
- the best of Mitutoyo on Amazon
- the best of Brown & Sharpe on Amazon
- the best of Starrett on Amazon
- the best of Fowler on Amazon
STARRETT
An American Manufacturing Tradition
Long Island Indicator Service
Long Island Indicator Service was founded in 1960. We provide professional repair service for precision measuring tools and gages with an emphasis on Swiss made test indicators, dial indicators, dial calipers and micrometers. We are pleased to be a recognized service partner for Brown & Sharpe.
Contact Us
Our Sales Terms
How to send repairs
Contact Us
Our Sales Terms
How to send repairs
Disclosure: Although most of the links on this website allow you to make a purchase directly from us, some links may direct you to Amazon. Any purchases you make from those links will result in a commission for us. That commission helps to pay for the construction and upkeep of this web site. We are grateful for any purchases you make through those links.
Privacy: We do not collect any information while you are visiting this website unless you proceed to place an order. If you place an order, your information will be kept confidential and will not be sold or made available to any other entity. If one of our links leads to Amazon, their privacy statement should be considered.
Privacy: We do not collect any information while you are visiting this website unless you proceed to place an order. If you place an order, your information will be kept confidential and will not be sold or made available to any other entity. If one of our links leads to Amazon, their privacy statement should be considered.