Compac P-Line test indicator spare parts
horizontal series 210 and vertical series 220
FOR REFERENCE ONLY
Compac test indicators were discontinued in 2020 until 2023 when metric models returned to production but re-branded as TESA P-Line.
Spare parts for Compac Series 210 (horizontal model with multiple revolutions) and Series 220 (vertical model with multiple revolutions) share the same parts with the new metric P-LIne series. Although the vertical model looks different, it uses the same parts.
These same parts were used for Mercer and SPI test indicators made in Switzerland.
These are the drawings for Compac horizontal model .0001" (215GA) and 0,002mm (215G). Some of the parts for the .0005" and vertical models (series 220) will have a slightly different appearance. Never-the-less, all of the indicators listed below will use the parts on this list.
We make no claims that these parts are user replaceable. Specialty tools may be required.
- Sorry, we cannot accept international orders at this time.
- We reserve the right to limit the sales of remaining spare parts.
| Drawing No. | Order No. | US$ | |
|---|---|---|---|
| Compac plastic box for vertical styles (series 220) | 01860010 | ||
| Compac plastic box for horizontal styles (series 210) | 01860009 | $25.50 (while stock lasts) | |
| 1 | adjustable bearing (ID 3,6 mm) old style no longer available | 044256 | |
| 1 | adjustable bearing (ID 2,0 mm) new style | 044259 | |
| 2 | housing for adjustable bearing (not in stock) | 044261 | |
| 3 | lock nut for adjustable bearing | 040987 | 21.50 |
| 4 | body for series 210 (old style) | 043254 | |
| 4 | body for series 210 (new style) | 043264 | |
| 7 | pivot assembly old style (.0005"/0,01mm) no longer available | 043281 | |
| 7 | pivot assembly new style (.0005"/0,01mm) | 043290 | |
| 8 | pivot assembly old style (.0001"/0,002mm) no longer available | 043292 | |
| 8 | pivot assembly new style (.0001"/0,002mm) | 043302 | |
| 9 | rack gear | 043258 | |
| 10 | crown gear | 043257 | |
| 12 | fixed ball bearing (ID 3,6 mm) old style no longer available | 044257 | |
| 12 | fixed ball bearing (ID 2,0 mm) new style | 044260 | |
| 13 | fixed jewel bearing (for cover) | 044263 | |
| 14 | cover for series 210 (old style) | 043255 | |
| 14 | cover for series 210 (new style) | 043265 | |
| 17 | return spring .0005" / 0,01 mm | 041029 | |
| 18 | return spring .0001" / 0,002 mm | 041044 | 21.50 |
| 19 | screw for cover | 041977 | 9.50 |
| 20 | adjustable jewel bearing | 044262 | |
| 21 | cover disc | 042112 | |
| 22 | bottom movement plate .0005" / 0,01 mm | 043283 | |
| 23 | bottom movement plate .0001" / 0,002 mm (with jewels) | 043294 | |
| 26 | first gear .0005" / 0,01 mm | 043285 | |
| 27 | first gear .0001" / 0,002 mm | 043297 | |
| 28 | intermediary gear .0001" / 0,002 mm | 043298 | |
| 29 | hair spring + gear assembled .0005" / 0,01 mm | 043287 | |
| 30 | hair spring + gear assembled .0001" / 0,002 mm | 043299 | |
| 31 | brass bearing ø 1.8 / 0.4 x 0.5 mm | 043256 | |
| 32 | bearing holder .0005" / 0,01 mm only | 041022 | |
| 33 | jewel ø 1.8 / 0.4 x 0.5 mm | 042363 | |
| 34 | top movement plate .0005" / 0,01 mm | 043284 | |
| 35 | top movement plate .0001" / 0,002 mm (with jewels) | 043296 | |
| 36 | center pinion .0005" / 0,01mm | 043286 | |
| 37 | center pinion .0001" / 0,002 mm | 041040 | |
| 38 | top movement plate screw | 041992 | |
| 39-42 | full selection of contact points | ||
| 43 | 27 mm mounting plate | 041003 | |
| 44 | 40 mm mounting plate | 041010 | |
| 47 | screw for mounting plate (M1.8X3) | 041988 | 10.50 |
| 48 | movement fastening screw | 041991 | |
| 49 | dials are not available from us at this time (see chart for numbers) | ||
| 50 | dial screw (M1.2 x 1.7) | 041984 | 21.50 |
| 51 | counter hand for 27 mm dials | 041007 | |
| 52 | counter hand for 40 mm dials | 041015 | |
| 53 | hand for 27 mm dials (see notes) | 041006 | |
| 54 | hand for 40 mm dials (see notes) | 041014 | |
| 57 | bezel with crystal installed 27 mm | 043259 | |
| 57 | crystal only (25.1 mm diameter) for models with 27 mm diameter bezel | 041008 | 18.50 |
| 57 | bezel with crystal installed 40 mm | 043270 | |
| 57 | crystal only (39.0 mm diameter) for models with 40 mm diameter bezel | 041016 | 18.50 |
| 59 | bezel spring 27 mm | 041005 | |
| 60 | bezel spring 40 mm | 041013 |
| Dial set (inner and outer) | Part No. |
|---|---|
| 212A | 041017 |
| 212GL | 041018 |
| 212L | 041019 |
| 213 | 041027 |
| 213GLA | 041032 |
| 213LA | 041033 |
| 214A | 041034 |
| 214GA | 041035 |
| 215 | 041042 |
| 215A | 041045 |
| 215G | 041046 |
| 215GL | 041049 |
| 222GL | 041055 |
| 223 | 041059 |
| 223GLA | 041062 |
| 223LA | 041063 |
| 224A | 041064 |
| 224GA | 041065 |
| 225 | 041066 |
| 225A | 041068 |
| 225G | 041069 |
| 225GA | 041071 |
Essential dimensions shown in mm
Notes:
How do you tell new style from old style? The old style had black ball bearing cases. The new ones have shiny chrome cases. These can be seen near the front of the body. There's no need to dismantle anything.
A note about crystals: unless you have experience and equipment, we suggest buying the bezel and crystal assembly. If you already know how to install new crystals and you have a crystal press at your disposal, then you can take a look at page 233. Detailed instructions are also available in the Compac Indicator Repair Manual.
The mounting hole of the hands have to be custom reamed to fit. You will need a very thin broach or reamer for this project. Refer to the repair manual for details.
How do you tell new style from old style? The old style had black ball bearing cases. The new ones have shiny chrome cases. These can be seen near the front of the body. There's no need to dismantle anything.
A note about crystals: unless you have experience and equipment, we suggest buying the bezel and crystal assembly. If you already know how to install new crystals and you have a crystal press at your disposal, then you can take a look at page 233. Detailed instructions are also available in the Compac Indicator Repair Manual.
The mounting hole of the hands have to be custom reamed to fit. You will need a very thin broach or reamer for this project. Refer to the repair manual for details.
- the Indicator Reference Guide
- the best of Mitutoyo on Amazon
- the best of Brown & Sharpe on Amazon
- the best of Starrett on Amazon
- the best of Fowler on Amazon
STARRETT
An American Manufacturing Tradition
Long Island Indicator Service
Long Island Indicator Service was founded in 1960. We provide professional repair service for precision measuring tools and gages with an emphasis on Swiss made test indicators, dial indicators, dial calipers and micrometers. We are pleased to be a recognized service partner for Brown & Sharpe.
Contact Us
Our Sales Terms
How to send repairs
Contact Us
Our Sales Terms
How to send repairs
Disclosure: Although most of the links on this website allow you to make a purchase directly from us, some links may direct you to Amazon. Any purchases you make from those links will result in a commission for us. That commission helps to pay for the construction and upkeep of this web site. We are grateful for any purchases you make through those links.
Privacy: We do not collect any information while you are visiting this website unless you proceed to place an order. If you place an order, your information will be kept confidential and will not be sold or made available to any other entity. If one of our links leads to Amazon, their privacy statement should be considered.
Privacy: We do not collect any information while you are visiting this website unless you proceed to place an order. If you place an order, your information will be kept confidential and will not be sold or made available to any other entity. If one of our links leads to Amazon, their privacy statement should be considered.