page 187

www.longislandindicator.com

Long Island Indicator Service Inc

Precision Tool Repairs, Sales & Spare Parts

repairs

spareparts

contactus

index

cart

search

Mitutoyo Spare Parts
Price List and Parts Order Page - currently valid pricing

Stop! Don't just order parts listed below without first checking the Mitutoyo parts list.

There are many different kinds of bezels or clamps for instance and they are not interchangeable among models. Even in photos and drawings, many of them look remarkably alike.

For correct parts identification, refer to our parts list on the following pages:

  • Contact points for test indicators ... page 21
  • Contact points for dial indicators ... page 133
  • Dial bore gauge ... page 190
  • Dial calipers Series 505 ... page 188
  • Dial indicator ... page 17
  • Digimatic digital calipers Series 500 ... page 189
  • Digimatic carbon calipers Series 552 ... page 189
  • Digimatic indicators ... page 17
  • Height gage ... page 228
  • Holtest ... page 223
  • Micrometers ... page 52
  • Test indicators Series 513 ... page 162

    Please note: we regret that we can not offer refunds for returned parts which you may have ordered in error. We can only give you credit for exchanges.

A good source for identifying Mitutoyo parts not listed here, is the manufacturer's own web-site.

Be advised that Mitutoyo does not stock uncommon repair items and delivery can be up to 3 months. Most of the parts listed below are in stock at this time, but exceptions do occur. We will let you know if there's a back order of more than 10 days.

A note about battery covers: Mitutoyo calls these "battery lids" and there are many designs and configurations. Unfortunately, many of the older model battery covers are now obsolete. To make sure that you order the correct battery lid, refer to the appropriate parts list shown on page 72.

A note about indicator backs: the backs are quite model-specific. Make sure that you are ordering the correct back by checking page 219 first.

 

A note about digital reading units: these are quite model specific and, if you order the wrong one, can not be returned for exchange, credit or refund.

 

pointinghandvintageimagegraphicsfairy2
You may order any part by clicking the linked part numbers (shown in brown) below.

 

If you are looking to purchase from Mitutoyo outside of the United States, you will have to contact a distributor in your own country. If you need help finding a distributor, please contact Mitutoyo in Japan at (044) 813 8201 or one of the following:
 

• Mitutoyo Canada at 1-905-821-1261

• Mitutoyo México at (525) 312-5612

• Mitutoyo UK at 44 (1264) 353123

• Mitutoyo India (New Delhi) at (91) 11-2637 2090

100685

counter-hand gear

19.50

100835

pivot

16.00

101008

pin (for anchoring the hair spring)

1.40

101027

pin (for anchoring the hair spring)

1.40

101028

screw

1.40

101029

bezel retaining spring, large

6.45

101030

bezel retaining spring, small

6.40

101032

crystal (clear plastic - slightly domed)

13.10

101039

flat back (see page 219)

15.65

101040

lug-on-center back for metric indicators (see page 219)

15.10

101042

bezel clamp (Mitutoyo refers to this as "washer")

7.55

101043

screw for bezel clamp

7.25

101047

end screw (stop screw)

7.55

101061

spindle (while supply lasts)

17.55

101063

guide pin for spindle

6.55

101067

center pinion (while supply lasts)

7.55

101074

center dial for model 2416

3.70

101088

guide pin for spindle

3.70

101097

screw

6.35

101125

end cap

9.60

101140

crystal (discontinued, while supply lasts)

29.60

101141

set screw

6.55

101167

back with offset lug (see page 219)

15.90

101169

back with 12.7 mm diameter post (see page 219)

21.15

101171

spindle stop screw

8.35

101182

screw

6.35

101183

top plate screw (discontinued, while supply lasts)

3.55

101185

contact point M4

12.10

101186

contact point M5

12.10

101187

contact point M6

12.10

101214

bezel clamp screw

12.60

101235

bezel clamp washer (while supply lasts)

5.60

101304

dial ring (plus 0-5-0 minus) while supply lasts

5.60

101330

replaced by 192753

101306

lug back (on center) see page 219

21.10

101421

sub-anvil (extension)

28.20

101567

rack screw

6.30

101574

pinion bearing screw

6.40

101579

crystal only (will require a crystal press for insertion)

8.95

101581

bezel lock screw (while supply lasts)

6.30

101592

thumb roller

9.90

101601

crystal only

13.80

101730

pinion

17.45

101820

gib pressure screw replaced by 05CAB036

101823

slider gib replaced by 146504

101829

dial 505-626

14.00

101957

dial 505-628

14.00

101969

slider gib (the coppery strip of metal)

12.40

102033

plug B (screw)

5.40

102036

stem attachment 4 mm

12.85

102075

spanner nut for ball bearing

7.65

102081

stem attachment 9.5 mm diameter

18.05

102086

lever screw

6.40

102148

spanner wrench

8.20

102257

screw

2.65

102454

bore gage anvil .44"

50.80

102455

bore gage anvil .48"

50.80

102456

bore gage anvil .52"

50.80

102457

bore gage anvil .56"

50.80

102458

bore gage anvil .60"

50.80

102459

bore gage anvil .64"

50.80

102460

bore gage anvil .68"

50.80

102461

bore gage anvil .72"

50.80

102474

bore gage anvil .40"

50.80

102531

guide screw for movable anvil (key screw)

6.55

102822

stem attachment 8 mm diameter

18.05

102824

contact point 1 mm diameter (limited supply)

9.85

102827

spindle spring

8.85

102832

contact point (limited supply)

9.85

102905

return spring

8.25

102916

spindle guide pin

1.55

102954

bezel (black metal) without crystal

12.25

102964

adjusting screw

1.55

103001

rod extension

2.65

103002

rod extension

2.65

103006

contact point with 2 mm diameter carbide ball

19.50

103007

contact point with 2 mm diameter carbide ball

19.50

103008

contact point with 2 mm diameter carbide ball

19.50

103009

contact point with 3 mm diameter carbide ball

19.50

103017

contact point with 1 mm diameter carbide ball

19.50

103019

contact point with 2 mm diameter carbide ball

19.50

103050

nut for ball bearing

7.30

103146

crystal only (#IPW285)

7.75

108000

gib (the brass piece that controls sliding pressure)

8.60

110443

crystal

13.45

119591

slider stop (obsolete without replacement)

112108

screw (set of 4)

10.00

113321A

screw (2 mm)

1.90

120616

bezel (1.46" ID) with crystal installed

16.25

128977

holder for gib

6.00

129444

bezel (requires crystal 101579)

11.60

130366

screw for bezel clamp

7.20

130367

bezel clamp only (obsolete without replacement)

131384

damper (rubber bumper)

3.70

131556

pinion (while supply lasts)

12.35

131559

replaced by part #901329

131397

bezel

17.45

131977

plate (while supply lasts)

8.25

132635

gib setting screw

6.35

132636

gib pressure screw

6.35

132826

center pinion (the hand fits onto this pinion)

19.35

132979

spring

6.35

133180

o-ring

11.50

137206

o-ring

8.70

137693

plastic spindle lifting lever

11.40

139663

clamping screw

8.70

139917

bezel and crystal assembly

12.45

140073

slider stop (discontinued without replacement)

141769

slider stop (plastic piece at end of calipers)

8.35

141770

roller hook

7.50

141771

thumb roller

9.35

141775

bezel

11.10

141776

crystal only

13.10

141861

base plate only (no longer available)

141863

bezel clamp only (no longer available)

141941

roller hook

Mitutoyo141941

9.35

141961

hook screw

6.45

142115

caliper zero adjustment tool

item4

7.75

142137

bezel clamp

7.60

145120

thumb roller hook (discontinued without replacement)

145164

mounting bracket

6.65

145171

battery cover (discontinued)

145489

battery cover (discontinued)

146034

battery cover

9.00

146330

roller hook (discontinued)

146331

screw (for hook)

5.95

146504

slider gib

6.65

146650

connector cap (if you're not using a cable)

6.55

190318

stem Ø 4 mm

20.05

192683

bezel and crystal assembled

19.50

192725

o-ring

11.30

192753

screw

7.10

193592

bezel clamp

6.45

193690

clamp screw

6.00

200157

friction washer

7.65

200158

friction screw

7.55

200159

friction cap

12.70

200355

micrometer anvil

15.70

200365

nut

8.55

200762

point anvil (stationary)

40.30

201194

key screw

6.45

201258

outer (retractable

) anvil

34.95

201280

outer anvil

25.50

201433

anvil 6.5 mm

93.70

202960

anvil E1

45.75

202961

anvil E2 (old number 202967)

49.20

202962

anvil E3 (old number 202968)

49.20

202963

anvil E4 (old number 202969)

52.10

202964

anvil E5 (old number 202970)

52.10

203392

contact rod

42.60

203398

contact rod

39.65

203766

glass plate

7.55

203771

key screw (old #301828)

7.55

205457

spacer .02"

13.25

205458

spacer .04"

13.25

205459

spacer .08"

13.25

205460

spacer .12"

13.25

205618

contact rod spring

7.40

205623

spacer .02"

8.15

205624

spacer .04"

8.25

205625

spacer .08"

8.25

205636

steel anvil #1 0.7"

18.35

205637

steel anvil #2 0.8"

18.60

205638

steel anvil #3 0.9"

14.35

205639

steel anvil #4 1.0"

15.80

205640

steel anvil #5 1.1"

15.80

205641

steel anvil #6 1.2"

15.80

205642

steel anvil #7 1.3"

21.90

205643

steel anvil #8 1.4"

21.90

205682

anvil nut

13.10

205684

spring

11.65

206170

blade anvil complete

44.75

206559

blade anvil complete

52.65

206691

contact point

31.05

206876

cap nut (hex nut)

8.25

207523

steel anvil E1 (old 205692)

20.05

207524

steel anvil E2 (old 205693)

20.05

207525

steel anvil E3 (old 205694)

20.05

207526

steel anvil E4 (old 205695)

21.90

207527

steel anvil E5 (old 205696)

21.90

207528

steel anvil E6 (old 205697)

21.90

207529

steel anvil E7

23.35

207530

steel anvil E8

23.35

207531

steel anvil E9

28.00

207532

steel anvil E10

28.00

207533

steel anvil E11

30.55

207534

steel anvil E12

30.55

207535

steel anvil E13

30.55

211202

carbide anvil No.1

34.25

211203

carbide anvil No.2

34.25

211204

carbide anvil No.3

38.25

211205

carbide anvil No.4

38.25

211206

carbide anvil No.5

34.25

211207

carbide anvil No.6

34.25

211208

carbide anvil No.7

34.25

211209

carbide anvil No.8

34.25

211210

carbide anvil No.9

34.25

211387

meter cover (plastic crystal only) discontinued

211978

driver

52.70

212127

spacer/washer (.02") 0.5 mm

8.25

212128

spacer/washer (.04") 1 mm

8.25

212129

spacer/washer (.08") 2 mm

8.25

212130

spacer/washer (.12") 3 mm

8.25

212153

anvil No.1

14.90

212154

anvil No.2

14.90

212155

anvil No.3

14.90

212156

anvil No.4

14.90

212157

anvil No.5

14.90

212158

anvil No.6

14.90

212159

anvil No.7

14.90

212160

anvil No.8

14.90

212161

anvil No.9

14.90

212162

anvil No.10

14.90

212163

anvil No.11

14.90

212176

sub anvil .4"

43.25

281372A

clear cover

13.85

301336

spanner for zero adjustment

12.75

303341

hexagonal nut

6.05

303787

thimble end screw

9.80

303955

anvil No.6

33.05

304004

replacement anvil No.6

37.95

304005

replacement anvil No.1

52.30

304006

replacement anvil No.2

50.85

304007

replacement anvil No.3

46.70

304008

replacement anvil No.4

43.90

304009

replacement anvil No.5

41.00

304011

stopper screw (clamp screw)

15.70

306046

battery cover (while supply lasts)

9.60

307438

stater assembly

37.95

308326

battery cover screw

5.75

308438

battery cover seal

5.95

308520

battery cover

6.55

308709

thimble end cap screw

9.65

308790

O-ring

5.60

309297

O-ring "packing"

13.00

450291

vinyl cover for 12" height gage series 192

19.90

541980

battery SR44 replaced by 938882

541985

screw

6.65

546666

screw for thumb roller hook

5.65

680004

plastic wheel "driving handle"

19.35

900032

contact point replaced by 21BZB005

900163

hand (while supply lasts) important: see notes at bottom of page

11.00

900183

bezel and crystal discontinued, no replacement

900257

hand (pointer) replaced by 06ACK324

900357

cap

22.40

900415

hand discontinued, no replacement

900525

lifting lever (without spindle end screw)

25.15

900573

hand, large important: see notes at bottom of page

12.75

900704

bezel with crystal installed

22.75

900706

72.4 mm diameter plastic crystal for old style AGD 3 Mitutoyo indicator

17.00

900919

bezel with crystal replaced by 129444 and 101579

900928

magnetic back for all models (see page 219)

43.40

901329

bezel and crystal assembled

21.35

901380

bezel and crystal assembled (discontinued without replacement)

901385

scriber clamp

35.00

901460

bezel and crystal (water-proof style)

22.55

901500

bezel and crystal assembled

19.00

901658

movement assembly (discontinued without replacement)

902428

complete head assembly (without anvils)

216.00

902585

bore gage clamp with screw (attaches head to indicator)

24.05

902794

lifting lever (spindle end screw included)

20.55

903307

lifting lever (without spindle end screw)

16.60

903425

lifting lever (spindle end screw included) old no.900330

25.15

905160

complete movement and base assembly (discontinued)

905162

bezel and crystal assembly

19.60

905163

complete movement and base assembly

25.25

905174

complete movement and base assembly

64.00

905202

storage case replaced by 905805

905283

replaced by 05 RAB 235

905632

cover assembly discontinued without replacement

905805

storage case replaced by 05RAB350

938882

battery SR44 (formerly part number 541980)
manufactured for Mitutoyo by Seiko Instruments, Japan.

15.65

950062

spindle lock clamp and screw

16.00

950063

spindle lock clamp and screw

16.00

950184

friction thimble assembly

34.40

950277

spindle lock clamp and screw

16.00

950700

ratchet assembly (metal) replaced by 04GZA239 (plastic)

950701

ratchet stop (metal)

20.50

950740

clamp assembly (up/down movement)

11.05

951527

counter (old no. 980253)

34.40

951712

clamp assembly

11.10

951996

set of 8 steel anvils

68.80

952116

counter assembly for 192-116

134.00

952118

counter assembly

162.00

952396

set of 6 carbide anvils

103.80

952819

driver assembly (crank) old no. 952270

59.15

953472

anvil set (11 pieces)

86.65

953473

anvil set (6 pieces)

52.60

953599

handle assembly (old no. 953446)

78.40

980389

3" measuring rod for Mitutoyo depth micrometer

23.30

980390

4" measuring rod for Mitutoyo depth micrometer

23.40

980391

5" measuring rod for Mitutoyo depth micrometer

25.20

980392

6" measuring rod for Mitutoyo depth micrometer

25.80

981236

spindle clamp (with screw)

11.10

981292

battery cover (discontinued) you can use 982444 as a suitable, if not perfect, replacement.

982401

complete panel assembly (discontinued with no replacement)

982444

battery cover with o-ring

12.60

982448

front panel (fits over the digital display)

15.45

982462

replaced by 04GZA016E

982647

plastic sleeve assembly "feeding unit assembly"

40.80

982705

end cap assembly

17.25

983530

9" depth rod

26.10

02ACA371

spindle return spring

7.75

02ACA381

battery cover

9.00

02ACA513

end cap

15.15

02ACB430

lug-on-center back (model specific, see parts list)

19.00

02AZC283

knob

12.75

02AZC291

stem adapter

11.35

04AAA268

rubber cap

7.35

04AAA489

key screw

6.35

04AAA570

thimble cap (screw sold separately)

20.30

04AAA946

anvil (parallel pin)

6.40

04AZA077

battery cap assembly (discontinued without replacement)

04AZA224E

front cover replaced by 04GZA811E

04AZA270

battery cover

11.45

04GAA285

anvil (steel)

15.85

04GAA286

anvil (carbide)

24.35

04GAA320

clamp screw

9.55

04GZA016E

complete panel assembly with LCD (while supply lasts)

90.00

04GZA239

complete ratchet assembly (for end of spindle)

20.50

04GZA241

complete ratchet assembly (for end of spindle)

20.50

04GZA357

clamp screw

9.90

04GZA811E

front cover (gray plastic, includes clear window)

79.00

05BAA083

slider stop (plastic piece at end of calipers)

10.85

05BAA112

plastic bezel clamp

7.45

05BAA113

screw

8.35

05BAA122

center pinion

14.50

05BAA138

slider stop (plastic piece at end of calipers)

11.45

05BAA150

rack (8")

27.50

05BAA167

plastic hook for thumb roller

9.15

05BAA187

bezel for 505-674, 505-675, 505-676

12.50

05BAA205

rack (12")

30.85

05BAA219

dial 505-677

14.00

05BZA037

bezel and crystal assembly

18.55

05BZA057

pinion assembly

38.85

05BZA061

back pinion assembly

34.20

05BZA063

complete movement assembly

61.50

05BZA064

rack gear assembly (pinion assembly)

34.50

05BZA067

gear assembly (back pinion)

BZA067

32.80

05BZA075

bezel and crystal assembly

19.70

05BZA083

bezel and crystal assembly

20.50

05BZA092

complete movement assembly

74.80

05BZA093

complete movement assembly

74.80

05BZA099

bezel and crystal assembly

22.55

05BZA100

bezel and crystal assembly

24.35

05BZA101

movment assembly

71.95

05CAA121

screw (for reading module)

5.70

05CAA204

battery cover (no longer available)

05CAA249

thumb roller hook

7.85

05CAA459

stopper screw (for end of beam) discontinued without replacement

05CAA587

has been replaced by 09GAA185

05CAA698

battery cover

9.80

05CAA738

battery cover

9.00

05CAA774

thumb roller hook

8.10

05CAA892

screw

5.90

05CAA893

screw

6.10

05CAA976

thumb roller hook

10.15

05CAB011

thumb roller hook

9.00

05CAB036

gib pressure screw

5.75

05CAB101

thumb roller hook

8.20

05CZA404

reading module replaced by 09GZA238

05CZA436

reading module

150.00

05CZA455

reading module

155.00

05HZA024

clamp assembly

10.15

05HZA026

encoder (assembly)

143.00

05RAB235

plastic case (6" dial or digital caliper)

27.70

05RAB350

plastic case (8" dial or digital caliper)

22.35

05RZA077

plastic case (12" dial or digital caliper)

35.65

05SAA372

battery seal

6.30

05SAA379

screw

6.05

05SAA405

battery cover

9.00

05SZA285B

reading unit assembly

74.45

05SZA293

battery cover

9.65

05SZA295B

reading unit assembly

143.00

05SZA317

battery cover

11.50

05SZA330

reading unit assembly

76.80

05SZA316B

reading unit assembly

97.20

05SZA333

reading unit assembly

82.50

06ACC981

reading unit assembly

108.00

06ACC983

reading unit assembly

119.00

06ACC979

case

29.45

06ACK324

hand (undersized hole will require customization for some gages)

20.75

06ADG062

thumb roller hook

9.10

06ADV380F

USB input tool direct (model specific)

check price

07SZA003B

reading unit assembly

197.00

09GAA035

thumb roller hook

6.80

09GAA073

thumb roller hook

8.25

09GAA095

battery cover

9.00

09GAA126

thumb roller hook

6.70

09GAA185

battery cover

GAA185a

11.45

09GAA230

positive battery terminal

12.80

09GZA047

reading unit replaced by 06ACC981

09GZA162

case assembly replaced by 09GZA244

09GZA238

reading unit assembly

85.90

09GZA243

ratchet stop assembly discontinued without replacement

09GZA244

case assembly

11.00

09GZA249

complete reading unit replaced by 06ACC981

09GZA252

case assembly replaced by 06ACC979

09GZA253

complete reading unit replaced by 06ACC983

09GZA351B

display module

99.60

09GZA352B

cover assembly

24.05

21AAB155

tolerance hands (2 pieces) for new style S

13.20

21AAB161

dovetail bracket (new style S)

13.30

21AAB163

bezel clamp (new style S)

8.10

21AZB149

lifting lever (new style S)

18.25

21AZB151

lifting lever (new style S)

19.45

21AZB161

bezel and crystal assembly

16.30

21AZB230

lug back for water-proof "S" indicators (see page 219)

14.35

21AZB231

flat back for water-proof "S" indicators (see page 219)

12.30

21AZB236

bezel and crystal assembly (new style S)

13.50

21BAA059

O-ring

7.40

21BAA083

bezel clamp (disc)

7.55

21BAA147A

bezel and crystal assembly

11.40

21BAB003

spindle guide pin

7.50

21BAB004

spindle stop screw (suitable for use with lifting lever)

9.75

21BZA014

hand (pointer) formerly 905161 important: see notes at bottom of page

19.35

21BZB005

contact point (formerly 900032)

19.50

21BZB007

intermediate gear

18.55

21CAA016

center pinion

11.00

21CAA022A

pivot

14.80

21CAA024

leaf spring

1.85

21CAA038

bezel and crystal assembled replaced by 21CAA149

21CAA149

bezel and crystal assembled (limited supply)

16.50

21CZA003

large hand (pointer) important: see notes at bottom of page

8.85

21CZA005

ball bearing

14.85

21CZA008

sector gear (these are model specific)

31.00

21CZA039

gear with hair spring

15.90

21CZA049

gear with hair spring

14.25

21CZA052

large hand (pointer) has been replaced by 21CZA003

21CZA108

cover assembly (with jewel bearing insert)

14.25

21CZA114

bezel and crystal assembled

21.25

21DZA000

indicator cover, clamp and screw (the indicator fits inside)

35.50

21DZA212

set of nine anvils

33.85

21DZA213A

anvil No.1

10.75

21DZA213B

anvil No.2

10.75

21DZA213C

anvil No.3

10.75

21DZA213D

anvil No.4

10.75

21DZA213E

anvil No.5

10.75

21DZA213F

anvil No.6

10.75

21DZA213G

anvil No.7

10.75

21DZA213H

anvil No.8

10.75

21DZA213J

anvil No.9

10.75

21EAA020

battery cover

12.40

21EZA158B

display module

67.10

21EZA199

spindle lifting lever (ANSI/AGD type)

11.25

Notes:

Hand (pointer): the hole will have to be custom reamed with a very small broach in order for it to fit on the center pinion of your indicator or dial calipers. If you do not have these tools, you may want to consider sending the gage to a repair shop. We will not customize your parts no matter how much money you offer us to do it. If you would like, you can order the repair tools on page 31.

 

 

www.longislandindicator.com
 


Click on image for updated product information, discussions and special offers!



Long Island Indicator Service Inc
14 Sarah Drive — Hauppauge NY 11788 — USA
 


Contact us
Shopping CartSales TermsRepair ServiceHome

This page's most recent revision: 26 AUGUST 2014
All Rights Reserved

Photographs and content copyright 2008-2014 by Long Island Indicator Service, Inc.