page 176

www.longislandindicator.com

Long Island Indicator Service Inc

Precision Tool Repairs, Sales & Spare Parts

repairs

spareparts

contactus

index

cart

search

Mahr-Federal Digital Calipers
MarCal
Series 16 EWR

MarCal16EWR4103066BIDateneckigVerlauf800x60072dpi

MarCal 4103066 with rectangular depth rod shown above

Product features

  • Inch and Metric readings
  • High contrast analog display
  • Locking screw above
  • Lapped guide way
  • Measuring blade for inside measurements
  • Slide and beam made of hardened stainless steel
  • Step measuring function
  • Instant reading
  • Raised guide ways for the protection of the scale
  • Excellent resistance against dust, coolants and lubricants
  • Dirt wipers are integrated in the slide
  • Height of digits: 8.5 mm
  • Battery, life span ca. 3 years
  • Industry standards: DIN 862 (for 0-6" and 0-8" models)
  • Resolution: .0005" (0.01 mm)
  • Error: .001" (0.03 mm) for range up to 8"
  • Error: .0015" (0.04 mm) for 12" range

Data interface

  • USB
  • Opto RS232C
  • Digimatic

IP protection category

  • IP 67

Included

  • Battery
  • Instruction manual
  • Case

Functions

  • ON/OFF
  • AUTO-ON / OFF
  • RESET (set display to zero)
  • mm/inch
  • LOCK function (key lock)
  • DATA (Data transmission via connection cable)

Range (inch / metric)

Thumb wheel

Depth rod

Order No.

Internet Discount

6" / 150 mm

no

round

4103064

check price

6" / 150 mm

yes

round

4103065

check price

6" / 150 mm

no

rectangular

4103066

check price

6" / 150 mm

yes

rectangular

4103067

check price

8" / 200 mm

no

rectangular

4103068

check price

8" / 200 mm

yes

rectangular

4103069

check price

12" / 300 mm

no

rectangular

4103070

check price

12" / 300 mm

yes

rectangular

4103071

check price

ScreenShot20160223at125144PM

Photograph shows detail of models with the thumb wheel.

Mahr Federal has introduced the next generation of waterproof digital calipers with the new MarCal 16 EWR. Featuring a new ergonomic design with lapped guideways and larger display, the MarCal 16 EWR offers IP 67 protection against dust, coolants and lubricants, extended three-year battery life, and an innovative zero-reference system which automatically stores the zero position for further measurements.

The ergonomic design of the new MarCal 16 EWR digital calipers features a handy non-slip thumb support that ensures trouble-free handling and reliable results even in contaminated working conditions. A large high-contrast display with 11 mm digits (editor's note: product description claims that these are only 8.5 mm high) enables accurate fatigue-free reading, and IP 67-rated construction delivers outstanding protection against dust and temporary water immersion. The finished plastic components also provide excellent chemical resistance.

Only MarCal calipers have lapped guideway surfaces. These guarantee an even and sensitive run of the slide, and also increase the service life of the caliper compared to ground guideways due to greater contact area on the guideway surface.

All Mahr digital calipers with the "Reference" logo are equipped with a new innovative Reference System in which the zero position only has to be set once. After setting, the zero remains stored for all further measurements, eliminating the need to reset zero every time the caliper is switched on. The new reference system is also extremely energy efficient. When the caliper is in standby mode and Integrated Wireless is deactivated, almost no power is required, thus extending battery life up to three years.

In addition to the standard guideway locking screw, the new MarCal 16 EWR is equipped with an electronic LOCK function. With this key lock, the zero position is secured and operating error avoided.

Mahr Federal Inc., a member of the Mahr Group, has been providing dimensional measurement solutions to fit customer application needs for over 150 years. The company manufactures and markets a wide variety of dimensional metrology equipment, from simple and easy-to-use handheld gages to technically advanced measurement systems for form, contour, surface finish and length. Mahr Federal is also well known as a producer of custom-designed gages and a provider of calibration and contract measurement services. Mahr Federal's calibration laboratories are accredited to ISO/IEC 17025:2005 NVLAP Lab Code 200605-0

(promotional copy provided by the manufacturer)



 

www.longislandindicator.com

Long Island Indicator Service Inc
14 Sarah Drive — Hauppauge NY 11788 — USA


Contact us
Shopping CartSales TermsRepair ServiceHome

This page's most recent revision: 17 AUGUST 2016
All Rights Reserved

Original photographs and content copyright 2016 by René Urs Meyer

glossyblack3dbuttoniconsocialmedialogosfacebooklogo2

Interested in metrology? Join our group on Facebook by clicking on the link above.